Thank you.
Thank you.
Question,
Just like JWolk217, I was looking at the Rizoma, what im wondering is if either version of the Rizoma bar will fit on a xb12s? I thought I heard someone say along time ago only the conical would fit, but would the standard 22mm work as well?
if you fit other clamps, yeahOriginally Posted by dgp
I am looking for my ideal bar:
[1] a more agressive/lower positioned bar
[2] one that I do not have to buy a clamp riser
[3] one that is the same diameter of my stock bar so I don't have to worry about the throttle tube not fitting
[4] a bar that does not have the "dirtbike" style cross bar
[5] a bar that does not hit the tank when turning
What are my options? Does anyone have a picture of what I am looking for?
The MX Style bars with the cross brace can always be removed. Most 7/8" MX style bars come with the cross brace. You will need a 7/8 bar. I would suggest going with the CR low style bar. Lower then stock and not that aggressive on the backwards sweep. Driven racing, Renthal, ProTaper all make good bars. I recently have sold alot of the Driven Racing CR Low style bars for fighter projects and I use them on all my bikes.
Does anyone know the dimensions of the stock 07 XB12s handlebars? Width, rise, pullback, and diameter? After looking at these Rizoma 'Conus' Tapered 29mm Handlebars, I didn't know what the 29mm meant. Will my stock clamps work with these?
A couple of questions:
1. How much are the Driven Racing bars (I have a 2003 XB9S)?
2. Do they have the little hole for the knob that keeps the headlight switch housing from moving around?
where did you see there??? will probably differ depending on the profit marging of seller.Originally Posted by bleblanc03
Driven racing makes 2 types of bars. The 7/8" bars are $60 and the 1 1/8" Fatty Tapered bars are $70 shipped. They do not have the hole for the switch but most people just notch out or drill a hole on all the MX style bars.
A couple of questions:
1. How much are the Driven Racing bars (I have a 2003 XB9S)?
2. Do they have the little hole for the knob that keeps the headlight switch housing from moving around?