Reply With QuoteYou can completely remove the cable however you need to leave the servo connected or you will get a warning light. If you want to remove the servo completely you will need an emulator.
I'm doing a home made muffler and was wondering, if I weld the exhaust valve open, what can i elimante as far as the cable to it goes? Can I completely remove it and what about the electrical going to it in the airbox?
You can completely remove the cable however you need to leave the servo connected or you will get a warning light. If you want to remove the servo completely you will need an emulator.
OK thanks a lot. good info
^^^or you need to disable the servo in EcmSpy. I removed my entire cable and wiring harness that went to the servo. Saved a few ounces!!:D
Posting Permissions