Page 1 of 3 123 LastLast
Results 1 to 10 of 21

Thread: rear drive belt!

  1. #1
    Senior Member black_xb12r's Avatar
    Join Date
    May 2007
    Posts
    255
    hey kinda new to the buell world had my XB12R for about 3 months now bought it used and snapped a belt.... just wondering if i have to take that little peice of swingarm off to change a belt and what else... anyone that can help would be greatly appreciated! thanks much
    casey

  2. #2
    Senior Member
    Join Date
    Jun 2007
    Posts
    3,958
    what's your milage?

    if the belt snapped due to premature wear => warranty

  3. #3
    Senior Member
    Join Date
    Oct 2006
    Posts
    1,962
    You have to lift the rear wheel off the ground. You have to remove the small swingarm section, all belt guards, front pulley cover, idler pulley and the rider footpeg bracket. Other than that its pretty easy, I would say. You need to know the torque of the bolts on the idler pulley and also the torque sequence for the rear axle.

  4. #4
    Senior Member black_xb12r's Avatar
    Join Date
    May 2007
    Posts
    255
    thanks BPG pretty much exactly what i thought it was going to be.... i change all my own tires at the local quad race shop caus ei race for them and stuff so im good with rear axle stuff so i will be able to figure it out...

    also Le Fox i have 9,994 on the bike and i am the second owner so im pretty sure that voids all warrenty stuff right there but not positive...
    thanks much both of you
    casey

  5. #5
    Senior Member
    Join Date
    Jun 2007
    Posts
    3,958
    it doesn't matter is your the second or 3rd or whatever owner.
    if there's no visual damage from rock or something, it can always be a waranty issue.

    especially when you see premature stress marks and brownish discolouration on the inner rope.

    9994(miles?)
    if it's the second generation belt, we get a new one as waranty.

  6. #6
    Senior Member
    Join Date
    Oct 2006
    Posts
    1,962
    03 and some 04 bikes may need the pulleys and belts updated due to an inferior design. They basically change the set up to the newer 05 and later design. You may want to check and see if you bike has been update. My bike wasnt updated and I snapped a belt at 10,251 on the clock.

  7. #7
    Junior Member
    Join Date
    Oct 2007
    Posts
    18
    So I just snapped a belt at only 2800 mi. Its an 03 XB9s. Just went to the Harley Dealership and at the parts counter I got insulted for riding a Buell. I was told, "they don't belong here, I don't even know why we sell them." I'm not surprised in the least but I couldn't believe how rude some people can be. It really leaves a sour taste in my mouth. Needless to say I walked away and didn't give them the $162 they wanted for the darn belt. Anyone know where I can get a belt off line? I'm boycotting that HD dealership unless absolutely necessary.

  8. #8
    Senior Member
    Join Date
    Feb 2007
    Posts
    1,080
    Boycott them all they're all dickheads....at least the ones i've been to...and thats 5 different dealers. One of which I went to spend about $1500 with my wife on some leather and accesories. It wasnt the service but more the lack of...Im a younger guy and they must have thought I wasnt gonna buy anything. Well I took the 2k cash I had on me and went on my computer Piss on em.

  9. #9
    Senior Member
    Join Date
    Jun 2007
    Posts
    3,958
    Quote Originally Posted by bdugal
    So I just snapped a belt at only 2800 mi. Its an 03 XB9s...
    ...Anyone know where I can get a belt off line?
    change to the upgraded belt, but you'll need to change the pulley too.

    they will last longer though...

  10. #10
    Junior Member
    Join Date
    Oct 2007
    Posts
    18
    Is there anything anybody heard about 03 and 04 belts being recalled due to an "inferior" design? If so that should entitle me to a "new and improved" belt, correct?



Page 1 of 3 123 LastLast

Similar Threads

  1. Rear Drive Belt
    By camiroj in forum Buell Firebolt XB12, XB9
    Replies: 4
    Last Post: 06-27-2013, 02:46 PM
  2. WTB BLAST rear wheel assembly + drive belt
    By ChickXB12Rider in forum Buell OEM parts
    Replies: 1
    Last Post: 12-20-2012, 03:47 PM
  3. Replies: 16
    Last Post: 08-21-2012, 01:25 AM
  4. need to know, drive belt, rear wheel bearings
    By djoslyn in forum Buell Ulysses XB12x
    Replies: 15
    Last Post: 03-09-2012, 07:32 PM
  5. Rear drive belt sheared about half of the teeth
    By johnd87 in forum Troubleshooting
    Replies: 3
    Last Post: 07-08-2010, 08:40 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •