this may help ,thinking reed or yz low bars but they may be inch or more lower than a stock cityx cross barshttp://www.buellxb.com/Buell-XB-Foru...ghtning-bars..
i just finished making a set of risers/ 1 1/8 bar mounts. they raise the bars 3/4" does anyone know what bend of protapers would get me close to stock bar height on an 05 xb9sx. I was planning on the CR high bend, but wondered if anyone one knew what would be close. Thanks for any input
this may help ,thinking reed or yz low bars but they may be inch or more lower than a stock cityx cross barshttp://www.buellxb.com/Buell-XB-Foru...ghtning-bars..
i have pro taper mini suzuki's on mine. they are almost identical to stock except they have 3" less bend (more drag bar style than the 4" sweep of stock). I used a 1" riser from precision engineering and all cables fit, but they were snug. also, here is a link to a bunch of bar measurements.
http://www.sideroadcycles.com/Import...ockBars78.html
i'll post a picture of my bars close up if you are interested.
Thanks for the input guys . that link to the bar height page helps alot!