For the tail you can get the diesel-moto fender
diesel-moto
and xb lights has a tail light with blinkers
xblights
I would like to get rid of the rear fender and blinkers and just have the tail light back there i cant find any kits and also wanted to move the license plate further under tail. Were would i find something for this?
For the tail you can get the diesel-moto fender
diesel-moto
and xb lights has a tail light with blinkers
xblights
yea the xb light guy already has my tail light and i just want the tail light be the only thing back there i dont want the blinkers and i want the license plate back almost behind the tire just above the rear hugger
LLeubbx it is a 1125.
if you really want to sink the plate way under just pull the rear fender and signals just the 3 t27 where it mounts.
Build a filler panel fairly simple.
Plexi glass or some thick plastic .
Build a couple L bracket and mount the plate or just bolt it to the under tray
I just made a filler out of plex and bolted my fire bolt plate frame (has the turn signal mounts on it).
in hind sight i used 1/4 plex which didn't shape well.
You can get 1/16" or 1/8" plastic at hobby shops and cut it with scissors
Sorry didn´t notice that was a 1125:p
holy crap i spent all that time making a filler EBR has one for 19 bucks
http://www.ebracing.com/shop/page5.html
I just cut down the stocker on mine... had to fill the 2 big ass holes... on the right side I cut down the palte light lens and on the right I just trimed down some of the extra plastic from the tail to fill the hole.... came out clean and best of all..... FREE
that would be sooooo illegal in ozl
i am sure those turns are not dot approved but in most states hand signals are legal so you don't have to have any