Page 1 of 7 123 ... LastLast
Results 1 to 10 of 67

Thread: CR 1125 exhaust

  1. #1
    Junior Member
    Join Date
    Jan 2010
    Posts
    2
    Hey guys what do you recomend for an exhaust i was searching for a racing sound

  2. #2
    Senior Member
    Join Date
    Dec 2009
    Posts
    400
    Attatch a playing card to your fork with a rubberband so the edge of the card just touches your spokes. Works awesome and is fairly inexpensive too!!:D

  3. #3
    Senior Member
    Join Date
    Jun 2009
    Posts
    2,728
    1125 options

    Barker found hereBarker
    Hmf herebest price on hmf
    FMF here
    american sport bike

    Personally i am going with the barker there is a discount on beull forums and bulliten board from puzzeld
    D&d EBR also have systems avible but there in the 600+ range where the three above are 300-400 Barker is the only one who has proven dyno power increase

  4. #4
    Senior Member
    Join Date
    Dec 2009
    Posts
    400
    From all the data I've gathered and all the sound bytes I've listened to, If you have the money,(about a grand) the drummer is the one to have IMO. More low end grunt, more thump thump sound and not so loud everyone in a two block radius hates you.

  5. #5
    Senior Member
    Join Date
    Aug 2008
    Posts
    131
    HR1 is an exhaust where you can customize the color of the tip and the body. The torquehammer is horribly ugly. Stay away from the free spirits! as it doesn't fit properly and have TERRIBLE customer service, and theres a write up on here somewhere about it. Jardine is pretty good and relatively inexpensive. The slip on that D&D makes for our bikes is the loudest pipe they produce, thats what I heard anyway. Youtube has quite a few custom pipes, hit those guys up if you like what you see and you can proli get one made. Thats all I got so good luck

  6. #6
    Senior Member
    Join Date
    Dec 2009
    Posts
    756
    I highly recommend the FMF apex slip on! A lot of bang for the buck! Plus coming from a MX background its just plain bad ass to have a FMF pipe on my street bike!


  7. #7
    Just wondering.....

    AM I THE ONLY ONE WHO IS PARTIAL TO THE STOCK 1125CR EXHAUST? CALL ME CRAZY, BUT I THINK THE ORIGINAL LOOKS THE BEST/CLEANEST/ ETC. I KNOW ITS HEAVIER, MAYBE A BIT MORE QUIET AND A LIL STIFLING, BUT DOES IT NOT LOOK WAAAAY BETTER THAN ALL THE AFTERMARKET STUFF? I DUNNO, WHAT DOES EVERYONE THINK? :)

  8. #8
    Senior Member
    Join Date
    Dec 2009
    Posts
    756
    I dis-agree... I think it looks bad and sounds like a lawnmower...? Plus they aim it right at the rear brake/wheel...

  9. #9
    Senior Member
    Join Date
    Dec 2009
    Posts
    756

  10. #10
    Senior Member
    Join Date
    Dec 2009
    Posts
    400
    I have the upmost respect for Erik B, but what the heck were the engineers thinking? Exiting the exhaust straight on the rear disk and caliper? Thats about the stupidest design I've ever seen!



Page 1 of 7 123 ... LastLast

Similar Threads

  1. WTB Exhaust and ECM for 1125
    By infamouscrew02 in forum Buell Parts for Sale
    Replies: 6
    Last Post: 09-17-2012, 11:45 PM
  2. OEM 1125 Exhaust
    By twp081321 in forum Buell Parts for Sale
    Replies: 0
    Last Post: 05-28-2011, 07:14 PM
  3. 1125 exhaust
    By twp081321 in forum Buell Parts for Sale
    Replies: 0
    Last Post: 04-03-2011, 04:48 PM
  4. 1125 exhaust?
    By bonechip67 in forum Buell Parts for Sale
    Replies: 6
    Last Post: 05-05-2010, 07:51 PM
  5. Quietest 1125 exhaust
    By slickncghia in forum Buell 1125R
    Replies: 32
    Last Post: 04-13-2010, 10:21 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •