You need some of these:
R1 Flushmounts
They fit perfectly with no modifications.
I tried to do the spacer relocation for the front turn signals but am having problems. When i moved the spacer to inside the wind screen I couldn't put the lights on because they were hitting the spacer. What am I doing wrong?
You need some of these:
R1 Flushmounts
They fit perfectly with no modifications.
I just pushed on the light till it was in far enough to locate the lower bolt. If my lights end up pointing too far up, I'll pull the spacers out and grind them down far enough to give some adjustment.
Would those flush R1 lights work on the tail section of the XBS too?
Thanks Oct for the recommendation. I'm trying to do as many free mods as possible since money is tight right now. I really like the looks of the shorter turn signals on the front but it looks like the only way to do it is to buy a set rear sets. I am trying to keep the bike looks semi stock as well.
dallasb- I'll be getting rid of my factory rear signals in a few days if you're interested.
Yea I would be interested...shoot me a pm when your ready
Just replace them with LED turn signals, would cost you less that $50, unless you get the good ones(mine were $80 per pair)
Yea but after you get the turn signals then you have to get the thing to slow down the flashing which is another 20 bucks. Which signals did you get jet?
Im not sure of the brand off the top of my head, there a UK based brand, ill think of it later and look for them on the net for you