are you talking about the pass peg bracket or the just the pin that holds the peg on?
anyone know where to order a set of the hex bolts that hold the pass pegs on the xb9s?
doing some work on the bike and I am missing 2 of them...pretty unique bolt size.
are you talking about the pass peg bracket or the just the pin that holds the peg on?
are you talking about the whole bracket or just the peg? because my pegs are held on by a pin with an e clip on the end.
edit: damnit joel..apparently you think faster than me
Nah. If you've got one of the bolts, look up "fasteners" in the yellow pages, and take it to a jobber. They'll be able to match up the one you take in, and will probably charge you a buck or less for a pair.
its the actual peg bracket bolt (which screws into the under-seat.
thanks baal...i tried to match it up at the hardware store, but the thing didnt want to thread into stardard OR metric nuts...
nuts.
its a socket head cap screw. it has to be a standard thread, there isnt much metric on these bikes. if my bike was here id take it off and let you know. if no one gets back to you by this weekend i can help but i cant right now.
5/8 allen wrench fits mine. they have them at any hdw. store
are you sure its 5/8" allen wrench? maybe its 5/16" 5/8" hex would refer to a 3/4" diameter bolt.
if its 5/16" drive its a most likely a 3/8-16. small chance its a fine thread which would be 3/8-24.
sorry man 5/16
The service/parts manual will have the exact bolt size.
Or you can take the one you have to Lowes/Home Depot or any other hardware store and match one up.