I need a race map to load into my ecmspy. My firmware version is BUEIB310. I have a drummer, air box delete, hose reroute, K&N filter. Need map that makes this stuff work now! Thanks!
I need a race map to load into my ecmspy. My firmware version is BUEIB310. I have a drummer, air box delete, hose reroute, K&N filter. Need map that makes this stuff work now! Thanks!
There is a 'race map' available for the open pipe already. No need for any other messing around.
Warning: I have had issues with BUEZD (and BUEOD) being buggy. Specifically the AFV will change its value when the key is cycled and that will make your attempt at custom tuning miserable. Especially since it sounds like you are attempting this by only Data Logging.
I would first get the firmware updated to the latest version (BUE2D). You will need to take the bike to a Harley dealer for that, but if they are a good one it should take :30 mins and $50.
Do NOT attempt to add a fuel map for a different firmware version.
Thanks for replying Cooter. We took it to the local Harley Dealer to get the BUE2d upgrade and they could not get it to take the upgrade for some reason, not sure why. I can't seem to find any race maps for an open pipe.
Rob
Hi Guys,
Could someone send me race map (can be full eeprom) to 2007 XB12? My ECM is stock BUEIB. I will send my e-mail on PM, thx
Since it's been a while since last "dealer only" for firmware update, is there another option yet? I'm awaiting my cable to start playing with ecmspy and tunerpro on my 2008 XB12S assuming it has BUEOD firmware, but would be nice to update to BUE2D before starting the tuning endless cycle.
Some guys keep hinting they are working on it or can do it, but nothing seems to happen
If you aren't having issues with the BUEOD firmware it is pointless to get the BUE2D. Especially if your plan is to tune it yourself.
Seems fine to me other than fan running logic, which isn't really a dealbreaker. My experience with tuning has been starting with someone elses dyno tuned maps and tweak from there through a very similar process as ECMspy but with a different software for vtwin KTMs called TuneECU. Same idea. I think I found a BUEOD eeprom but the description is poor so we'll see how it compares to stock. I also reached out to IDS to see what firmware they would write to my ECM, would save me a lot of time but I think this kind of stuff is fun!
So this may explain my bueyd issue? I made a tune with maps off of bue2d file, changed load and rpm axis to match. Bike ran great! For the first ride.... By this fourth ride it would barely get out of its own way BUT afv is still 100. I just figured out how to log so sounds like I need to see what happening during the ride. Why can't bueyd take fuel maps from a bue2d? (with axis corrected)
Edit: Found a harley dealer somewhat nearby that still has the capability to reflash Buell ECM's. I might go try to get the bue2d and hopefully be done.
Last edited by blackoutt; 08-21-2017 at 01:45 PM.
Am I looking at the right parameter in Tunerpro? AFV always at 100 but I noticed at afr1 and afr2 move around, and I see the history tables filling in. Also TPS is always at 9% open and can't get it to set any lower, is that correct for an 08? I've tried the throttle snap TPS reset with no change. I should probably start my own thread with tuning questions huh.. do I have enough posts for that yet?
Tell us the bike symptoms and I bet one of these guys will have you lined out in no time.