My ecmspy version shows it, so I assume it can be done.
Buezd eeprom does not have fan vs. speed control. Need to flash to a newer eeprom for that.
My ecmspy version shows it, so I assume it can be done.
It can be but not on a buezd or older eeprom. You will need to flash to bue1d or bue2d eeprom to do the speed based fan control. HD can flash your eeprom to a newer version. Please see the recent fan thread for more information.
@lawdog, do you have a link to the thread?
I am trying to help a friend of mine tune his bike (neither of us know that much about it). He purchased an XB12s 2008, DDFI 3, BUEZD, K&N filter and a Jardine pipe that has been gutted completely (just an empty can). I am trying to use Tunerpro RT to tune this bike. I finally got it to connect read/write and log. I could use a race map to use as a good base.
Thanks
There is a 'race map' available for the open pipe already. No need for any other messing around.
Warning: I have had issues with BUEZD (and BUEOD) being buggy. Specifically the AFV will change its value when the key is cycled and that will make your attempt at custom tuning miserable. Especially since it sounds like you are attempting this by only Data Logging.
I would first get the firmware updated to the latest version (BUE2D). You will need to take the bike to a Harley dealer for that, but if they are a good one it should take :30 mins and $50.
Do NOT attempt to add a fuel map for a different firmware version.
Thanks for replying Cooter. We took it to the local Harley Dealer to get the BUE2d upgrade and they could not get it to take the upgrade for some reason, not sure why. I can't seem to find any race maps for an open pipe.
Rob
Hi Guys,
Could someone send me race map (can be full eeprom) to 2007 XB12? My ECM is stock BUEIB. I will send my e-mail on PM, thx
Since it's been a while since last "dealer only" for firmware update, is there another option yet? I'm awaiting my cable to start playing with ecmspy and tunerpro on my 2008 XB12S assuming it has BUEOD firmware, but would be nice to update to BUE2D before starting the tuning endless cycle.