^^^^^^^^^^^^^^^^^Same here along with the wideband O2 sensor/TuneaBuell apparatus, radial 16mm M/C and new throttle assembly.
Just installed my Right Scoop,,,,, now the bike is balanced,,,, use to lean to the left......LOL
^^^^^^^^^^^^^^^^^Same here along with the wideband O2 sensor/TuneaBuell apparatus, radial 16mm M/C and new throttle assembly.
Didn't happen unless we see pics !
Had to go out in the cold for these,,, 44 degrees down here....
IMG_1031.jpgIMG_1030.jpg
Outthere: I'm so confused by those pics.
Thats a NB O2 sensor, not the WB TunaBuell one?
The pic of the front O2 bung (2010?)
A 16mm Radial Master is a really nice part to put on a ZTL caliper but 2010 bikes had a ZTL-2. That master would be way too small for a big ZTL-2.
'Splain?
manufacturers recommendation. Should work out ok? My brakeing hand only has an index finger and a thumb that's usable so all my braking needs to be close to the bar and not to stiff. If not they said to send it back. The Tuneabuell sensor's installed. The one in the pic is the unit I removed. Throttle & M/C made by Accossato. More research and the stock master is 3/4" bore.
http://www.accossato.com/EN/motorcyc...r-cylinder.php
Last edited by outthere; 03-06-2019 at 09:58 PM.
Is your bike a 2010? (Front head pipe bung) Inquiring minds...
Does it have a ZTL-2 Caliper? If so, ya the OE Master is 19mm (3/4"). I tried an 17mm Radial M/C and couldn't even get enough pressure to stop the bike with the lever pulled to the grip!
Curious what you find with yours. Is the lever hard now with the system bled?
Thats, not good news ( a few cuss words). Haven't got it bleed yet, need a 10x1 banjo. Headers are not original. It has ZTL-2 caliper.